Product Features:

• White casing
• One green starboard and one red port light
• Suitable for boats up to 15 m
• Two nautical mile visibility
• Easy installation
• Mounting hardware NOT included

Specifications:

• IP66 Enclosure - IP rated as "dust tight" and protected against heavy seas or powerful jets of water
• Material: Poly-carbonate body and Acrylic glass
• Color:
  • Body: White
  • Lens: One red and one green
• Beam angle : 112.5°
• Voltage: 12V DC
• Bulb: Led, 100 mA
• Dimensions (Each): H: 3" (74 mm) x W: 3 1/4" (83 mm) x D 1 3/4" (45 mm)
• Weight (Each): 2 oz (76 gr)

Features:

• Item is designed to easily engage / disengage the line under high-loads
• For high load applications on small diameter lines
• Optimized clutching and holding power 
• Manufactured from high-grade plastics which are strong, light, and impact resistant

Specs for (6-8)mm:

• Line size: 6 mm to 8 mm 15/64" - 5/16"
• Dimensions: D 46 mm x W 53 mm x L 90 mm (144 mm with handle open)
• Dimensions: D 1 13/16" x W 2 11/128" x L 3 35/64" (5 87/128" with handle open)
• Weight 400 gr / 14.11 oz

Specs for (10-12)mm:

• Line size: 10 mm to 12 mm 25/64" - 15/32"
• Dimensions: D 46 mm x W 53 mm x L 90 mm (144 mm with handle open)
• Dimensions: D 1 13/16" x W 2 11/128" x L 3 35/64" (5 87/128" with handle open)
• Weight 400 gr / 14.11 oz

Features:

• White in color
• Specifically designed for marine applications and made with high quality materials to minimize corrosion and wear for a long service life
• Can be used for a boat, yacht, RV, even in for a shed
• 4mm thick tempered glass
• Comes with constant torque friction hinges that hold position throughout their full range of motion
• Two dog ears snap-in place and screwed down for a tight seal
• High-quality waterproof sealing rubber strip, good sealing effect and long service life
• Easy to install; simply snap in place and secure by tightening via pre-drilled countersunk fastening holes
• Hardware not included

Specs:

• Diameter:
  • Cutout: 8 1/4" (209 mm)
  • With trim: 10 1/2" (265 mm)
  • Window opening: 7 3/4" (197 mm)
  • Glass: 7 1/8" (181 mm)
• Mounting Depth: 1 1/2" (38 mm)
• Weight: 2 lb (902gr)

Single Blocks

40mm (10mm rope) - 50mm (14mm Rope) - 70mm (16mm Rope) size options

• Side-plates: UV-stabilized with reinforced nylon composite for maximum protection 
• Block Connection: Swivel shackle
• Becket: Yes

Features:

• Stainless-steel polished flange
• Suitable for 1 1/2" (38mm) hose
• Key to open the cap is included
• Only a quarter turn will lock/unlock the cap
• Blue cap is marked with "WATER" makes it easy to identify that this deck fill is for water
• Cap is tethered by chain for easy of use and cap retention
• Water and air tight
  • Cap is sealed with a replaceable ring
  • Flange sits on a rubber gasket
• Specifically designed for marine applications and made with high quality materials to minimize corrosion and wear for a long service life
• Mounting hardware NOT included

Specs:

• Handle (Key) Length: 4" (102mm)
• Diameter: 
  • Flange gasket: 3.54" (90mm)
  • Flange: 3.35" (85mm)
  • Hose Connection: 1.5" (38mm)
• Mounting Depth: 2.91" (74mm)
• Installation holes on center: 2.36" (60mm)
• Weight: 8.4oz (238gr)

Product Features:

• 316 stainless-steel housing
• One green (starboard) and one red (port) light
• Suitable for boats up to 12m
• Two nautical mile visibility
• Easy, flush mount installation
• Includes black gasket
• Mounting hardware is NOT included

Specifications:

• IP66 Enclosure - IP rated as "dust tight" and protected against heavy seas or powerful jets of water
• Material: Stainless-steel polished housing
• Color:
  • Body: Chrome
  • Lens: Clear lenses with one red and one green reflective backgrounds
• Beam angle : 112.5°
• Voltage: 12V  DC, .75 W each
• Bulb: Led, 100 mA
• Dimensions (Each): L: 7.88" (200mm) x W: 2.36" (60mm) x D 0.98" (25mm)
• Mounting holes on center: 136mm / 5.35"
• Weight (Each): 3 oz (110 gr)

Product Features:

• White with gray accent on lever top
• Top mount style
• One lever offers dual-function for both shifting and throttle for one engine
• Used for outboard, inboard, and sterndrive engines with or without hydraulic gears
• Built-in friction mechanism to avoid throttle creep
• Smooth shifting and throttling
• Capable of high idling
  • When the lever is in neutral position, grab it from the bottom where the logo is and pull out. This will disengage the gear. Now it can be idled at any speed without engaging the gear.
  • Move the lever back to neutral position and it will snap back to the body of the unit and now you can push/pull forward/reverse to engage the gear.
• Body made of strong ABS material
• Internal parts are made of stainless steel and bronze
• Resistant to weather and sea conditions

Specifications:

• Dimensions:
  • Base: 152 mm (6") x 102 mm (4")
  • Height (Base to top of lever): 223 mm (8 25/32)
  • Min. mounting depth: 8 1/2" (214 mm)
• Weight: 1196 gr (2 lb 10 oz)

Features:

• Item is designed to easily engage / disengage the line under high-loads
• For high load applications on small diameter lines
• Optimized clutching and holding power 
• Manufactured from high-grade plastics which are strong, light, and impact resistant

Specs for (6-8)mm:

• Line size: (6 - 8)mm / (15/64 - 5/16)"
• Dimensions: DxWxL
  • 1x2x3.5" (5.6" with handle open) 25x53x90mm (142mm with handle open)
• Weight: 8oz / 228gr
• Specs for (10-12)mm:
• Line size: 0.39-0.47" (10 - 12mm)
• Dimensions: DxWxL
  • 1.22x2.45x3.58" (5.67" with handle open) 31x57x91mm (144mm with handle open)
• Weight: 9.38oz / 266gr

Product Features:

• This is a high quality, lightweight, compact, tubular radar reflector
• To be mount onto a stay or shroud
• Aluminum sheets folded at about 90 degree angles and stacked up in the plastic tube provides a larger reflective area which help increase the Radar Cross Section value.

Specifications: 

• Length: 22 3/4" (578 mm)
• Diameter: 2" (50 mm)
• Weight: 9 oz (272 gr)

Single Diamond Block 

40mm (10mm rope) - 50mm (14mm rope) - 70mm (16mm rope) size options

• Side-plates: UV-stabilized with reinforced nylon composite for maximum protection 
• Block Connection: Swivel shackle
• Becket: No

Product Features:

• White ABS, Poly-carbonate Lens
• One green starboard and one red port light
• Suitable for boats up to 15 m
• Two nautical mile visibility
• Easy installation
• Marine grade construction
• Mounting hardware NOT included
• Waterproof: IP66

Specifications:

• IP66 Enclosure - IP rated as "dust tight" and protected against heavy seas or powerful jets of water
• Material: Poly-carbonate body and Acrylic glass, Chrome plated top cover
• Color:
  • Body: Shell Color: White, Base Color: White
  • Lens: One Red and One Green
• Beam angle : 112.5°
• Voltage: 12V  DC
  • Input to this item is polarized, so make sure to connect properly before permanent installation
  • Port and Starboard have two wires each
• Bulb: Led, 5 Watt, 2 LEDs for each side (port and starboard)
• Dimensions: H: 1.77" (45 mm) x W: 2.84" (72 mm) x D 3.47" (88 mm)
• Installed with two screws; 2.28" / 58 mm on center
• Weight (Each): 2.33 oz (66 gr)

Features:

• White in color
• Specifically designed for marine applications and made with high quality materials to minimize corrosion and wear for a long service life
• Can be used for a boat, yacht, RV, even for a shed
• 4mm thick tempered glass
• Two dog ears snap-in place and screwed down for a tight seal
• High-quality waterproof sealing rubber strip, good sealing effect and long service life
• Easy to install; simply snap in place and secure by tightening via pre-drilled countersunk fastening holes
• Hardware not included

Specs:

• Horizontal x Vertical:
  • Cutout: 13" (330 mm) x 5 1/8" (130 mm)
  • With trim: 15 1/2" (396 mm) x 7 3/4" (197 mm)
  • Window opening: 12 1/4" (311 mm) x 4 1/2" (115 mm)
  • Glass: 12" (305 mm) x 4 1/4" (108 mm)
• Mounting Depth: 1 1/2" (38 mm)
• Weight: 3 lb 4 oz (1484 gr)

Rod Holder Flush mount

Black or White option

Features:

• Item is designed to easily engage / disengage the line under high-loads
• For high load applications on small diameter lines
• Optimized clutching and holding power 
• Manufactured from high-grade plastics which are strong, light, and impact resistant

Specs:

• Line size: 6 mm to 8 mm 15/64" - 5/16" or 10 mm - 12 mm, 25/64" - 15/32"
• Dimensions: D 67 mm x W 53 mm x L 90 mm (144 mm with handle open)
• Dimensions: D 2 41/64" x W 2 11/128" x L 3 35/64" (5 87/128" with handle open)
• Weight 572 gr / 1 lb 4.18 oz

Single Blocks

40mm (10mm Rope) - 50mm (14mm Rope) - 70mm (16mm Rope) size options

• Stainless Steel Shackle, Head post & Hub
• Side-plates: UV-stabilized with reinforced nylon composite for maximum protection 
• Block Connection: Swivel shackle
• Becket: No

Single Diamond Block with Becket

40mm 10mm Rope) - 50mm (14mm Rope) - 70mm (16mm Rope) size options

• Stainless Steel Shackle, Head post & Hub
• Side-plates: UV-stabilized with reinforced nylon composite for maximum protection 
• Block Connection: Swivel shackle
• Becket: Yes

Features:

• Stainless-steel polished flange
• Suitable for 1 1/2" (38mm) hose
• Key to open the cap is included
• Only a quarter turn will lock/unlock the cap
• Yellow cap is marked with "TOILET" makes it easy to identify that this deck fill is for Waste Water
• Cap is tethered by chain for easy of use and cap retention
• Water and air tight
  • Cap is sealed with a replaceable ring
  • Flange sits on a rubber gasket
• Specifically designed for marine applications and made with high quality materials to minimize corrosion and wear for a long service life
• Mounting hardware NOT included

Specs:

• Handle (Key) Length: 4" (102mm)
• Diameter: 
  • Flange gasket: 3.54" (90mm)
  • Flange: 3.35" (85mm)
  • Hose Connection: 1.5" (38mm)
• Mounting Depth: 2.91" (74mm)
• Installation holes on center: 2.36" (60mm)
• Weight: 8.4oz (238gr)