top of page

Base Type Double Block, Sheave 90 mm, Rope (Line) up to 20mm

Product Features:

  • Stainless Steel Base, Head post & Hub
  • Roller are not ball bearing so they will not have any issues that come with ball bearing rollers
  • Side-plates: UV-stabilized with reinforced nylon composite for maximum protection 
  • Block Connection: Base Mounting
  • Becket: No
  • Mounting screws are NOT included
Specifications:
  • Sheave Diameter: 3.54" (90mm)
  • Max. Line (Rope) Diameter: 0.78" (20mm)
  • Max. Working Load (MWL): 9920lb (4500kg) 
  • Breaking Load: 4960lb (2250kg) 
  • Weight: 3lb 1oz (1388gr)
  • Base plate: 6.5x4.7" (165x120mm)
  • Mounting holes on center: Short side:3.7" (94mm). Long-side: 5.5" (140mm)

USD

119

Boat Anchor Bow Roller 316 Stainless Steel 405 mm 16"

Features:

  • Constructed from Grade 316 stainless steel with white rubber wheel
  • Six point predrilled mounting points for easily installation
  • Hardware is not included. 8 mm (5/16") bolts can be used
  • Can support lines / chains up to 1"

 

Specs:

  • Body Dimensions: L: 405 mm (16") x W 55 mm (2 1/4")
  • Roller Wheel Dimensions: W 49 mm (2") x Dia. 63 mm (2 1/2")
  • Mounting Length: Three sets of double mounting points. 136 mm (5 23/64") in between each set
  • Inside Channel: W 48 mm (2")
  • Opening between the safety pin and the roller: 28mm / 1.1"
  • Weight: 1148 gr (2 lb 8 oz)
 

USD

85

Boat Intake Sea Raw Water Seawater Strainer Filter Size 3/4" 19 mm

This Raw Water Strainer is designed to filter the debris from the seawater to prevent the pipes from clogging.

It can be used to provide filtered water for a variety of applications such as engine cooling, air conditioning, washdown pump, and shower sump.

If in future should you need a replacement basket, we've got you covered. https://www.ebay.com/itm/133399035737

Features:

  • Specifically designed for marine applications and made with high quality materials to minimize corrosion and wear for a long service life
  • Wing nut and bolt are stainless steel and provide easy access to the strainer basket
  • Clear top cover provides instant strainer inspection and is sealed with a gasket for a tight fit
  • Mounting hardware or fittings are not included

Specifications:

  • Color: Gray body, white strainer basket, clear lid
  • Material: ABS
  • Wing nut and bolt: Stainless steel 10 mm
  • Intake and exit ports: 3/4" (19 mm) female NPT threads (Side out, Bottom in)
  • Dimensions with handle and ports:
    • H 5" (127 mm) x W 6 1/2" (165 mm) x Diameter 5 1/4" (133 mm)
    • Strainer basket: Height 2 1/8" (54mm)  Diameter: Top 4 3/4" (121 mm) Bottom 4 1/4" (108 mm)
  • Weight: 13 oz (394 gr)

USD

45

Chrome 12V LED Starboard & Port Navigation Bi-color Bow Light

Product Features:

  • Stainless Steel Plated, Poly-carbonate Lens
  • One green starboard and one red port light
  • Suitable for boats up to 15 m
  • Two nautical mile visibility
  • Easy installation
  • Marine Grade Construction
  • Mounting hardware NOT included
  • Waterproof: IP66

Specifications:

  • IP66 Enclosure - IP rated as "dust tight" and protected against heavy seas or powerful jets of water
  • Material: Poly-carbonate body and Acrylic glass, Chrome plated top cover
  • Color:
    • Body: Shell Color: Chrome, Base Color: Black
    • Lens: One Red and One Green
  • Beam angle : 112.5°
  • Voltage: 12V  DC
    • Input to this item is polarized, so make sure to connect properly before permanent installation
    • Port and Starboard have two wires each
  • Bulb: Led, 5 Watt, 2 LEDs for each side (port and starboard)
  • Dimensions: H: 1.77" (45 mm) x W: 2.84" (72 mm) x D 3.47" (88 mm)
  • Installed with two screws; 2.28" / 58 mm on center
  • Weight (Each): 2.33 oz (66 gr)

 

 

USD

29

CHROME 6,25" 12V LED SUPER SLIM SURFACE MOUNT CEILING LIGHT

Product Features:

  • 12V high quality 21 LEDs with long-life
  • Dimmable 
  • Chrome frame
  • Super slim: Only 1/2" depth
  • Suitable for boat, yacht, RV, camper trailer internal applications as ceiling light, down light, and cabinet light
  • Easy installation
    • Surface mount. No need to cut any surface other than running the wires
    • Can be mounted with screws or double sided tape
  • IP44 Protection class
  • Mounting hardware NOT included

Specifications:

  • Color:
    • Body: Chrome
    • Lens: Opaque
  • Voltage: 12V DC
  • Dimensions: 
    • Depth: 1/2" (12 mm)
    • Diameter: 6,25" (160 mm)
  • Weight: 4.3 oz (122 gr)

USD

45

Double Block with Becket

Double Block with Becket

40mm (10mm rope) - 50mm (14mm rope)- 70mm (16mm rope) size options

 

  • Stainless Steel Shackle, Head post & Hub
  • Side-plates: UV-stabilized with reinforced nylon composite for maximum protection 
  • Block Connection: Swivel shackle
  • Becket: Yes

USD

39

Dual Station Unit

These unit combine the action of the single lever control from either of two command stations and provide a single output to the gearbox lever.

 

  • Easy mounting
  • One dual station unit offers dual station function for shifting or throttle for one engine
  • Used for outboard, inboard, and sterndrive engines with hydraulic gears
  • Built-in friction mechanism to avoid throttle creep
  • Smooth shifting and throttling
  • Parts are made of stainless steel and bronze
  • Resistant to weather and sea conditions
Specifications:
  • Dimensions:
    • Base: 5.63x2.36x (143x60mm)
    • Height: 1.63" (42mm)
  • Weight: 11.2oz (316gr)

USD

95

BLACK 11" Base Mount Combo Navigation Light Anchor-Port-Starboard

Product Features:

  • Black base mount and light housing base, Chrome pole
  • Anchor Light All-round clear lens, Port Light 112.5 degree Red Lens, Starboard light 112,5 degree green Lens
  • Suitable for sail and power boats up to 15 m
  • Two nautical mile visibility
  • Easy installation
  • Fixed mounting type
  • Waterproof design, IP66
  • Mounting hardware NOT included

Specifications:

  • Material: Poly-carbonate body and acrylic glass
  • Color:
    • Body: Black Body, chrome pole
    •  All Round Clear Lens, Port Red 112.5 degree red, Starboard 112.5 degree green
  • Voltage: 12V DC
  • Bulb: Side Lights 12V Led, All Round Anchor Light B15 12V 5W (Can be replaced with a B15 LED bulb)
  • Dimensions:
    • Height: 11" (282 mm)
    • Width: 4.17" (106 mm)
    • Depth: 6.42" (163 mm)
    • Base: 3.5x1.65" (89x42 mm)
  • Weight: 11.15 oz (316 gr)

USD

51

Boat Intake Sea Raw Water Seawater Strainer Filter

This Raw Water Strainer is designed to filter the debris from the seawater to prevent the pipes from clogging.

It can be used to provide filtered water for a variety of applications such as engine cooling, air conditioning, washdown pump, and shower sump.

If in future should you need a replacement basket, we've got you covered. https://www.ebay.com/itm/133399035737

Features:

  • Specifically designed for marine applications and made with high quality materials to minimize corrosion and wear for a long service life
  • Wing nut and bolt are stainless steel and provide easy access to the strainer basket
  • Clear top cover provides instant strainer inspection and is sealed with a gasket for a tight fit
  • Mounting hardware or fittings are not included

Specifications:

  • Color: Gray body, white strainer basket, clear lid
  • Material: ABS
  • Wing nut and bolt: Stainless steel 10 mm
  • Intake and exit ports: 1 1/2" (38 mm) female NPT threads
  • Dimensions with handle and ports:
    • H 7" (178 mm) x W 7" (178 mm) x Diameter 5 1/4" (133 mm)
    • Strainer basket: Height 4 1/4" (108 mm)  Diameter: Top 5" (125 mm) Bottom 3 3/4" (95 mm)
  • Weight: 1 lb 1 oz (506 gr)

USD

60

Boat Mooring Docking Rope Rat Rodent Guard for Yachts, Motor Cruisers, All Boats

Features:

  • Constructed from Grade 316 stainless steel with white rubber wheel
  • Six point predrilled mounting points for easily installation
  • Hardware is not included. 8 mm (5/16") bolts can be used
  • Can support lines / chains up to 1"

 

Specs:

  • Body Dimensions: L: 405 mm (16") x W 55 mm (2 1/4")
  • Roller Wheel Dimensions: W 49 mm (2") x Dia. 63 mm (2 1/2")
  • Mounting Length: Three sets of double mounting points. 136 mm (5 23/64") in between each set
  • Inside Channel: W 48 mm (2")
  • Opening between the safety pin and the roller: 28mm / 1.1"
  • Weight: 1148 gr (2 lb 8 oz)
 

USD

39

CHROME 4" 12V LED SUPER SLIM SURFACE MOUNT CEILING LIGHT

Product Features:

  • 12V, high quality, long-life 9 LEDs
  • Dimmable
  • Chrome frame
  • Super slim: Only 1/2" depth
  • Suitable for boat, yacht, RV, camper trailer internal applications as ceiling light, down light, and cabinet light
  • Easy installation
    • Surface mount. No need to cut any surface other than running the wires
    • Can be mounted with screws or double sided tape
  • IP44 Protection class
  • Mounting hardware NOT included

Specifications:

  • Color:
    • Body: Chrome
    • Lens: Opaque
  • Voltage: 12V DC
  • Dimensions: 
    • Depth: 1/2" (12 mm)
    • Diameter: 4" (104 mm)
  • Weight: 1.7 oz (48 gr)

USD

29

Chrome Port & Starboard 12V LED Navigation Side Lights Surface Mount

Product Features:

  • Long lasting LED with low power consumption
  • High quality strong ABS housing
  • One green (starboard) and one red (port) light
  • Suitable for boats up to 12m
  • Two nautical mile visibility
  • Easy, surface mount installation
  • Mounting hardware IS included

Specifications:

  • IP66 Enclosure - IP rated as "dust tight" and protected against heavy seas or powerful jets of water
  • Material: Stainless-steel polished housing
  • Color:
    • Body: CHROME
    • Lens: Clear lenses with one red and one green reflective backgrounds
  • Beam angle : 112.5°
  • Voltage: 12V  DC
  • Bulb: Led, 100 mA, six LEDs in each light
  • Dimensions (Each): L: 3.74" (95mm) x W: 1.97" (50mm) x D 1.3" (33mm)
  • Weight: 6.3oz (178gr)

 

 

USD

49

DUAL FIN HYDROFOIL PERFORMANCE STABILIZER FOR BOATS OUTBOARD MOTOR up to 50 HP

Will it fit on your engine?

While this item is considered universal for outboard motors and stern drives, please make sure the item will fit on your engine's cavity plate.
Maximum cavity plate thickness: 5.5mm, 7/32"

Minimum cavity plate depth: 24mm, 15/16"
A 13/64 drill bit (not included) can be used to drill holes on your cavity plate.
 

It is in stock here in US and ready to ship.

Please contact us via eBay for larger quantities.

Features:

  • Dual fins
  • Easy installation on cavitation plate
  • UV resistant VERY strong plastic material
  • Suitable for outboard motors up to 50 HP
  • Helps the boat get on a plane by increasing the lift output by the engine
  • Reduces fuel consumption by keeping the boat on a plane at slower speeds
  • Lessens propeller cavitation. Cavitation can physically damage the propeller, reduces engine output, and causes vibration leading to a less comfortable ride
  • Allows the use of rudder with minimum power, increase stability for a smoother ride, reduce bow rise
  • Mounting hardware is included

Specs:

  • Color: Black
  • Suitable for most outboards & stern-drives up to 50 HP
  • Dimensions (individual fins):
    • Length: Outer edge: 7 1/2" (189 mm) Inner edge: 2 1/2" (62 mm)
    • Width: Rear: 6 3/4" (172 mm)
  • Weight: 13 oz (372 gr)
  • Mounting holes distance on center: 2 1/2" (65 mm)

USD

35

Elliptical Oval Porthole 16" x 8 1/2"

Features:

  • White in color
  • Specifically designed for marine applications and made with high quality materials to minimize corrosion and wear for a long service life
  • Can be used for a boat, yacht, RV, even in a shed
  • 4mm thick tempered glass
  • Comes with constant torque friction hinges that hold position throughout their full range of motion
  • Two dog ears snap-in place and screwed down for a tight seal
  • High-quality waterproof sealing rubber strip, good sealing effect and long service life
  • Easy to install; simply snap in place and secure by tightening via pre-drilled countersunk fastening holes
  • Hardware not included

Specs:

  • Horizontal x Vertical:
    • Cutout: 13 1/4" (337 mm) x 5 3/4" (146 mm)
    • With trim: 16" (407 mm) x 8 1/2" (216 mm)
    • Window opening: 12 43/64" (322 mm) x 5 1/8" (130 mm)
    • Glass: 12" (305 mm) x 4 1/2" (114 mm)
  • Mounting Depth: 1 37/64" (40 mm)
  • Weight: 2 lb 10 oz (1192 gr)

USD

30

Black Port & Starboard 12V LED Navigation Side Lights Surface Mount

Product Features:

  • Long lasting LED with low power consumption
  • High quality strong ABS housing
  • One green (starboard) and one red (port) light
  • Suitable for boats up to 12m
  • Two nautical mile visibility
  • Easy, surface mount installation
  • Mounting hardware IS included

Specifications:

  • IP66 Enclosure - IP rated as "dust tight" and protected against heavy seas or powerful jets of water
  • Material: Stainless-steel polished housing
  • Color:
    • Body: Black
    • Lens: Clear lenses with one red and one green reflective backgrounds
  • Beam angle : 112.5°
  • Voltage: 12V  DC
  • Bulb: Led, 100 mA, six LEDs in each light
  • Dimensions (Each): L: 3.74" (95mm) x W: 1.97" (50mm) x D 1.3" (33mm)
  • Weight: 6.2oz (176gr)

USD

41

Boat Intake Sea Raw Water Seawater Strainer Filter Female NPT Size 2" 50.8 mm

This Raw Water Strainer is designed to filter the debris from the seawater to prevent the pipes from clogging.

It can be used to provide filtered water for a variety of applications such as engine cooling, air conditioning, washdown pump, and shower sump.

Features:

  • Specifically designed for marine applications and made with high quality materials to minimize corrosion and wear for a long service life
  • Wing nut and bolt are stainless steel and provide easy access to the strainer basket
  • Clear top cover provides instant strainer inspection and is sealed with a gasket for a tight fit
  • Mounting hardware or fittings are not included

Specifications:

  • Color: Gray body, white strainer basket, clear lid
  • Material: ABS
  • Wing nut and bolt: Stainless steel 10 mm
  • Intake and exit ports: 2" (50.8 mm) female NPT threads
  • Dimensions:
    • Height: 253mm (9.96")
    • Width: 
      • Port side:261mm (10.28")
      • Hanging bracket side: 249mm (9.81")
    • Basket: (Diameter x Height) 168x152mm 6.62x5.98
  • Weight: 1738gr (3lb 13oz)

USD

210

BRASS 5" 12V LED SUPER SLIM SURFACE MOUNT CEILING LIGHT

Product Features:

  • 12V high quality 12 LEDs with long-life
  • Dimmable
  • Brass plated frame
  • Super slim: Only 1/2" depth
  • Suitable for boat, yacht, RV, camper trailer internal applications as ceiling light, down light, and cabinet light
  • Easy installation
    • Surface mount. No need to cut any surface other than running the wires
    • Can be mounted with screws or double sided tape
  • IP44 Protection class
  • Mounting hardware NOT included

Specifications:

  • Color:
    • Body: Brass Plated, Yellow
    • Lens: Opaque
  • Voltage: 12V DC
  • Dimensions: 
    • Depth: 1/2" (12 mm)
    • Diameter: 5" (129 mm)
  • Weight: 2.75 oz (78 gr)

USD

32

CHROME 5" 12V LED SUPER SLIM SURFACE MOUNT CEILING LIGHT

Product Features:

  • 12V high quality 12 LEDs with long-life
  • Dimmable
  • Chrome frame
  • Super slim: Only 1/2" depth
  • Suitable for boat, yacht, RV, camper trailer internal applications as ceiling light, down light, and cabinet light
  • Easy installation
    • Surface mount. No need to cut any surface other than running the wires
    • Can be mounted with screws or double sided tape
  • IP44 Protection class
  • Mounting hardware NOT included

Specifications:

  • Color:
    • Body: Chrome
    • Lens: Opaque
  • Voltage: 12V DC
  • Dimensions: 
    • Depth: 1/2" (12 mm)
    • Diameter: 5" (129 mm)
  • Weight: 2.75 oz (78 gr)

USD

32

Double Block

Double Blocks

40mm (10mm Rope) - 50mm (14mm Rope) - 70mm (16mm Rope) size options

 

  • Side-plates: UV-stabilized with reinforced nylon composite for maximum protection 
  • Block Connection: Swivel shackle
  • Becket: No

USD

39

DUAL FIN HYDROFOIL PERFORMANCE STABILIZER FOR BOATS with OUTBOARD MOTOR 50 HP+

Will it fit on your engine?
While this item is considered universal for outboard motors and stern drives, please make sure the item will fit on your engine's cavity plate.
Maximum cavity plate thickness: 8mm,  5/16"
Minimum cavity plate depth: 34mm, 1 11/32"
A 15/64 drill bit (not included) can be used to drill holes on your cavity plate.
 
It is in stock here in US and ready to ship.

Please contact us via eBay for larger quantities.

Features:
  • Dual fins
  • Easy installation on cavitation plate
  • UV resistant VERY strong plastic material
  • Suitable for outboard motors 50 HP+
  • Helps the boat get on a plane by increasing the lift output by the engine
  • Reduces fuel consumption by keeping the boat on a plane at slower speeds
  • Lessens propeller cavitation. Cavitation can physically damage the propeller, reduces engine output, and causes vibration leading to a less comfortable ride
  • Allows the use of rudder with minimum power, increase stability for a smoother ride, reduce bow rise
  • Mounting hardware is included
Specs:
  • Color: Black
  • Suitable for most outboards & sterndrives over 50 HP
  • Dimensions (individual fins):
    • Length: Outer edge: 10 1/2" (265 mm) Inner edge: 3 1/2" (89 mm)
    • Width: Rear: 9 1/2" (242 mm)
  • Weight: 2 lb 3 oz (1014 gr)
  • Mounting holes distance on center: 3 1/2" (90 mm)

USD

45

bottom of page